Calculate radar line-of-sight horizon distance from antenna and target heights. Includes atmospheric refraction (k-factor), Fresnel zone, and target height lookup table.
The radar (or radio) horizon is the maximum distance at which a radar or radio signal can propagate in a straight line from an antenna to a target, limited by the curvature of the Earth. For standard atmospheric conditions, the refraction factor k = 4/3 extends the horizon about 15% beyond the geometric (optical) horizon.
This calculator computes the radar horizon distance from antenna height and target height, accounting for atmospheric refraction via the adjustable k-factor. It also calculates the geometric horizon (k=1) for comparison, the wavelength at the given frequency, and the first Fresnel zone radius at the horizon.
A target height table shows the maximum line-of-sight range for surface, 10m, 100m, 1km, and 10km target heights — essential for understanding detection envelopes. The refraction conditions table explains sub-refraction, standard, super-refraction, and ducting.
This tool is used by radar engineers, RF link designers, maritime navigators, and ATC planners to determine coverage limits.
Radar coverage analysis and RF link planning require accurate horizon calculations. This tool provides instant results with adjustable atmospheric conditions.
The target height table is particularly valuable for military radar coverage assessment and ATC surveillance planning. Keep these notes focused on your operational context. Tie the context to the calculator’s intended domain. Use this clarification to avoid ambiguous interpretation.
d = √(2·k·Re·h_a) + √(2·k·Re·h_t). where Re = 6,371 km, k = 4/3 standard. Geometric (no refraction): k = 1. Simplified: d(km) ≈ 4.12·(√h_a + √h_t) for k=4/3, h in meters.
Result: Radar horizon = 18.4 km (9.9 NM)
d = √(2 × 4/3 × 6371000 × 20) = √(339.8×10⁶) = 18,400 m = 18.4 km. With k=1: d = 16.0 km. Refraction adds 15%.
Use consistent units, verify assumptions, and document conversion standards for repeatable outcomes.
Most mistakes come from mixed standards, rounding too early, or misread labels. Recheck final values before use. ## Practical Notes
Use concise notes to keep each section focused on outcomes. ## Practical Notes
Check assumptions and units before interpreting the number. ## Practical Notes
Capture practical pitfalls by scenario before sharing the result. ## Practical Notes
Use one example per section to avoid misapplying the same formula. ## Practical Notes
Document rounding and precision choices before you finalize outputs. ## Practical Notes
Flag unusual inputs, especially values outside expected ranges. ## Practical Notes
Apply this as a quality checkpoint for repeatable calculations.
The k-factor accounts for atmospheric refraction bending radio waves downward. k = 4/3 (1.333) is the standard for temperate climates. k varies from ~0.7 (extreme sub-refraction) to infinity (ducting).
Super-refraction (k > 4/3) happens when warm, dry air overlies cool, moist air — common over warm ocean surfaces. It extends radar range beyond normal but can create blind zones.
Ducting occurs when the atmospheric refractive index decreases so rapidly with height that radio waves are trapped in a layer, bending downward more than the Earth curves. This can extend radar range by hundreds of km — or create complete detection failures at certain altitudes.
The horizon distance is independent of frequency. However, frequency affects diffraction around the horizon, atmospheric absorption, and the Fresnel zone clearance required for practical link design.
Radio and optical horizons use the same geometry but different k-factors. For optics, k ≈ 1.06-1.08 (visible light refracts less than microwaves). For radio: k ≈ 4/3.
This calculator assumes a smooth, spherical Earth. Terrain obstructions (hills, buildings) reduce the effective line of sight. For real link planning, use terrain profile tools with digital elevation models.