Convert volume to weight using material density. Supports 30+ materials (water, steel, concrete, gold, wood, and more), multiple volume and weight units, and custom densities.
How much does a cubic yard of concrete weigh? How about 55 gallons of diesel fuel or a liter of gold? The relationship between volume and weight depends on density — the mass per unit volume of a material. This calculator makes that conversion instant and effortless.
Enter a volume in any common unit (liters, gallons, cubic feet, cubic meters, and more) and select a material from the built-in database of 30+ substances spanning liquids, metals, building materials, woods, and other common substances. The calculator multiplies volume by density to produce weight in kilograms, grams, pounds, ounces, metric tons, and US tons simultaneously.
If your material is not in the list, enter a custom density in kg/L, lb/ft³, or kg/m³. The calculator normalizes everything internally so you can mix and match units freely.
Practical applications are everywhere: shipping departments need package weights, contractors calculate material haul weights, cooks convert between volume and mass measurements, and engineers size structural supports based on material loads. The density reference table lets you look up and compare materials at a glance, and the visual bar chart shows weight in different units for quick comprehension.
Presets cover everyday scenarios — a gallon of water, a load of sand, a barrel of fuel — so you can explore and verify results immediately.
Volume-to-weight conversions matter whenever the same container size can hold very different materials. A gallon of water, diesel, honey, or concrete slurry does not weigh the same, so shipping estimates, load planning, and material ordering all depend on density. This calculator handles both the density lookup and the unit conversion so you can move directly from container size to usable weight figures.
Weight = Volume × Density kg = Liters × (kg/L) lb = kg × 2.20462 oz = lb × 16 Metric ton = kg / 1000 US ton = lb / 2000 Unit conversions: 1 gal = 3.785 L, 1 ft³ = 28.317 L, 1 m³ = 1000 L
Result: 176.93 kg, 390.02 lb
55 gallons × 3.785 L/gal = 208.18 L. Weight = 208.18 L × 0.85 kg/L = 176.93 kg. In pounds: 176.93 × 2.205 = 390.02 lb.
Volume alone does not tell you how heavy something is. The missing ingredient is density, which measures how much mass is packed into each unit of volume. Once everything is converted into compatible units, the calculation is straightforward: weight equals volume times density. The challenge in practice is usually the unit conversion, not the multiplication.
Two containers with the same capacity can differ enormously in weight depending on what fills them. One liter of water is close to 1 kilogram, while one liter of gold is more than 19 kilograms and one liter of air is almost negligible by comparison. That spread is why contractors, shipping teams, and lab workers rely on density references instead of guessing from volume alone.
This type of conversion is useful for truck loading, ingredient scaling, tank planning, and estimating structural loads. Often the best workflow is to enter the container size in the unit you actually have, choose the closest material, and then compare the result across kilograms, pounds, and tons. The built-in table also helps you spot whether a custom density looks reasonable before you trust the final weight.
Multiply the volume by the material's density. For example, 10 liters of water: 10 L × 1 kg/L = 10 kg. This calculator handles all unit conversions automatically.
Density is mass per unit volume, commonly measured in kg/L (same as g/cm³). It tells you how heavy a given volume of material is. Water = 1 kg/L, steel ≈ 7.85 kg/L, gold ≈ 19.32 kg/L.
About 8.34 pounds (3.785 kg). One US gallon = 3.785 liters, and water has a density of 1 kg/L.
Approximately 4,050 lb (1,837 kg). A cubic yard = 27 ft³ = 764.6 L, multiplied by concrete's density of ~2.4 kg/L.
Yes — type a density in the custom field and select the unit (kg/L, lb/ft³, or kg/m³). The calculator converts it internally.
Because they have different densities. Atoms pack more tightly in denser materials. Gold (19.3 kg/L) is 19× heavier than water per unit volume.