Enter any angle in degrees or radians to find sin, cos, tan, csc, sec, cot, (x, y) coordinates, quadrant, and reference angle on the unit circle. Common angles table included.
The unit circle is a circle of radius 1 centered at the origin (0, 0) on the Cartesian plane. It is the single most important diagram in trigonometry because every trigonometric function can be read directly from it. For an angle θ measured counter-clockwise from the positive x-axis, the point where the terminal side intersects the circle has coordinates (cos θ, sin θ). From those two values, all six trig functions follow: tan θ = sin θ / cos θ, cot θ = cos θ / sin θ, sec θ = 1 / cos θ, and csc θ = 1 / sin θ.
Students encounter the unit circle in pre-calculus, AP math, physics, and engineering courses. The "standard" angles — 0°, 30°, 45°, 60°, 90°, and their multiples through 360° — appear so often that memorizing their sine and cosine values is practically mandatory. This calculator lets you look up any angle instantly, not just the standard ones, and shows exact symbolic values where they exist.
Beyond the classroom, the unit circle underlies signal processing (Fourier analysis decomposes signals into sine and cosine components), computer graphics (rotation matrices use cos and sin), robotics (joint kinematics), and navigation (bearing calculations). Understanding the quadrant of an angle tells you the sign of each trig function, while the reference angle — the acute angle between the terminal side and the nearest x-axis — simplifies evaluation of trig functions for any angle.
This calculator accepts input in degrees or radians, instantly outputs all six trig values, the (x, y) point, the quadrant, and the reference angle. Presets for all 16 standard unit-circle angles and a complete reference table make studying or double-checking homework effortless.
The unit circle is the backbone of trigonometry, but students often lose time converting between degrees and radians, normalizing angles, and tracking quadrant signs. This calculator makes those connections explicit by showing coordinates, all six trig functions, the quadrant, and the reference angle together, so you can study patterns instead of repeatedly rebuilding them from memory.
Coordinates: (x, y) = (cos θ, sin θ) tan θ = sin θ / cos θ cot θ = cos θ / sin θ sec θ = 1 / cos θ csc θ = 1 / sin θ Reference angle: θ_ref = |θ mod 360| adjusted to [0°, 90°] Quadrant: I (0–90°), II (90–180°), III (180–270°), IV (270–360°)
Result: sin 60° = 0.8660, cos 60° = 0.5, tan 60° = 1.7321, (x, y) = (0.5, 0.866), Quadrant I, Ref = 60°
At 60° the unit-circle point is (cos 60°, sin 60°) = (0.5, √3/2 ≈ 0.866). tan = 0.866/0.5 = 1.732. The angle is in Quadrant I, so all trig values are positive. The reference angle equals the angle itself since it is already between 0° and 90°.
The key idea of the unit circle is that every angle lands on a point whose coordinates are $(cos heta, sin heta)$. Once you know those two numbers, tangent, secant, cosecant, and cotangent follow from simple ratios and reciprocals. That makes the circle more than a picture to memorize: it is a compact map linking geometry, algebra, and graphing.
Most non-standard trig questions become easier once you reduce the angle to a reference angle and identify its quadrant. For example, 150° has the same reference angle as 30°, but the quadrant tells you cosine must be negative while sine stays positive. This calculator highlights that relationship directly, which is useful when checking test work or building intuition for periodic behavior.
The standard angles repeat important exact-value patterns: 30°, 45°, and 60° generate the familiar fractions with $sqrt{2}$ and $sqrt{3}$. Instead of memorizing disconnected tables, compare the coordinate outputs and sign changes as the angle moves around the circle. That approach makes it easier to remember why trig values repeat, when they become undefined, and how degree and radian measures describe the same location.
The unit circle is a circle with radius 1 centered at the origin. Any angle θ measured from the positive x-axis maps to the point (cos θ, sin θ) on this circle.
Multiply degrees by π/180. For example, 45° × π/180 = π/4 radians. Conversely, multiply radians by 180/π to get degrees.
The reference angle is the smallest positive angle between the terminal side and the x-axis. It is always between 0° and 90° and has the same absolute trig values as the original angle.
tan θ = sin θ / cos θ. At 90°, cos 90° = 0, so you divide by zero. Similarly, sec 90° = 1/cos 90° is undefined.
The quadrant of an angle determines which trig functions are positive. Q-I: all positive. Q-II: sin, csc. Q-III: tan, cot. Q-IV: cos, sec.
Yes. Negative angles go clockwise. Angles >360° wrap around the circle. The calculator normalizes them and finds the correct quadrant and reference angle.