Calculate all sides, area, perimeter, and heights of 30-60-90 and 45-45-90 special right triangles. Enter any one side to find the rest.
Special right triangles are right triangles whose angles create fixed side ratios, making them invaluable shortcuts throughout mathematics, physics, and engineering. The two most important types are the 30-60-90 triangle (side ratio 1 : √3 : 2) and the 45-45-90 triangle (side ratio 1 : 1 : √2). Because the ratios are constant, knowing just one side is enough to determine all three sides—no trigonometry required. This calculator lets you select the triangle type, choose which side you know (short leg, long leg, or hypotenuse for 30-60-90; leg or hypotenuse for 45-45-90), and enter its length. It instantly computes all three sides plus the area, perimeter, all three altitudes, the inradius, and the circumradius. A visual bar chart compares side lengths, and a reference table summarises the exact ratios and formulas for both triangle types. Eight presets demonstrate common configurations found in standardised tests, construction, and physics problems. Whether you're preparing for the SAT, designing a roof pitch, or verifying trigonometric identities, this tool provides every measurement you need from a single input.
Special right triangles are supposed to save time, but only if you remember exactly which side ratio belongs to which angle pattern. Many mistakes come from mixing the $1 : sqrt{3} : 2$ ratio with the $1 : 1 : sqrt{2}$ ratio, or from starting with the wrong known side. This calculator removes that ambiguity by letting you pick the triangle family and the specific side you know before it derives every remaining measurement.
It is useful not only for classroom exercises, but also for quick geometric estimates. Square diagonals, roof pitches, ladder placement, and coordinate-geometry shortcuts often reduce to one of these two triangle types. The extra outputs such as area, radii, and altitudes make the tool more useful than a simple side-ratio converter.
30-60-90 ratios: short leg : long leg : hypotenuse = 1 : √3 : 2. 45-45-90 ratios: leg : leg : hypotenuse = 1 : 1 : √2. Area = ½ · base · height. Circumradius = hypotenuse / 2. Inradius = (a + b − c) / 2.
Result: Short leg = 5, long leg ≈ 8.66, hypotenuse = 10
For a 30-60-90 triangle, the sides are always in the ratio 1 : √3 : 2. With short leg 5, the long leg is 5√3 ≈ 8.66 and the hypotenuse is 10. The area is 1/2 × 5 × 8.66 ≈ 21.65, and the perimeter is about 23.66.
Special right triangles matter because they turn trigonometry into arithmetic. A 30-60-90 triangle always scales from the ratio $1 : sqrt{3} : 2$, and a 45-45-90 triangle always scales from $1 : 1 : sqrt{2}$. Once you know one side, every other side follows from multiplication or division. That makes these triangles some of the fastest tools in geometry, especially when exact radical answers are expected instead of decimal approximations.
The 30-60-90 triangle appears naturally when you split an equilateral triangle in half. The short leg becomes half of a side, the long leg becomes the altitude, and the original side becomes the hypotenuse. The 45-45-90 triangle comes from cutting a square along its diagonal, which explains why its two legs are equal. Remembering those origins makes the ratios easier to reconstruct if you forget them during a test or homework problem.
When a geometry problem contains a square, an equilateral triangle, a diagonal, or a $30^circ$, $45^circ$, or $60^circ$ angle, check whether a special right triangle is hidden in the diagram before reaching for sine or cosine. Doing that can shorten multi-step algebra dramatically. This calculator is helpful because it confirms the full set of derived values, including perimeter and area, while reinforcing which side name corresponds to each ratio position.
A right triangle with angles 30°, 60°, and 90°. Its sides are always in the ratio 1 : √3 : 2, where 1 is the short leg opposite 30° and 2 is the hypotenuse.
An isosceles right triangle with two 45° angles. Its sides are in the ratio 1 : 1 : √2, where the two legs are equal and the hypotenuse is √2 times a leg.
Because their side ratios are fixed and can be expressed with simple radicals, making calculations faster and eliminating the need for a calculator in many problems. Use this as a practical reminder before finalizing the result.
The shortest side is opposite the 30° angle, the medium side (× √3) is opposite 60°, and the longest side (hypotenuse) is opposite the 90° angle. Keep this note short and outcome-focused for reuse.
Roof pitches (30-60-90), diagonal bracing of square frames (45-45-90), staircase design, computer graphics rotation, and standardised test problems. Apply this check where your workflow is most sensitive.
No. These ratios apply only to the specific 30-60-90 and 45-45-90 right triangles. For general triangles, use the Law of Sines or Law of Cosines.