Calculate all properties of a 45-45-90 isosceles right triangle from a leg or hypotenuse. Find area, perimeter, inradius, circumradius, and height to hypotenuse with presets and reference table.
The isosceles right triangle—often called the 45-45-90 triangle—is one of the two special right triangles in geometry (the other being the 30-60-90). It has two equal legs and interior angles of exactly 45°, 45°, and 90°. Because of these fixed proportions, every measurement of the triangle can be derived from a single length: either a leg or the hypotenuse.
The key ratio is simple: the hypotenuse is always √2 times the leg (c = a√2), and conversely a leg equals the hypotenuse divided by √2. The area is half the square of the leg (a²/2), and the perimeter is 2a + a√2. This makes 45-45-90 triangles extraordinarily common in carpentry (diagonal bracing), tile cutting, architecture, and standardized testing.
This calculator accepts either a leg length or a hypotenuse length and instantly computes everything: both legs, hypotenuse, area, perimeter, height to the hypotenuse, inradius, and circumradius. Eight quick presets let you explore common values, a visual bar chart compares all dimensions at a glance, and a reference table lists leg-hypotenuse-area triples for the most frequently encountered sizes. Whether you are a student memorizing special triangles or an engineer sizing a diagonal brace, this tool handles it all in one click.
Isosceles Right Triangle (45-45-90) problems often require several dependent steps, and a small arithmetic slip can propagate through every derived value. This calculator is tailored to that workflow: you enter decimal places, solve from, unit, and it returns leg (a = b), hypotenuse (c), area, perimeter in one consistent pass. It is useful for homework checks, worksheet generation, tutoring walkthroughs, and fast field/design estimates where you need reliable geometry results without rebuilding the full derivation each time.
c = a√2 (hypotenuse from leg). a = c/√2 (leg from hypotenuse). Area = a²/2. Perimeter = 2a + a√2. Height to hypotenuse = a/√2. Inradius = a(√2 − 1). Circumradius = c/2.
Result: Hypotenuse ≈ 14.1421, Area = 50, Perimeter ≈ 34.1421
With leg = 10: hypotenuse = 10√2 ≈ 14.1421, area = 10²/2 = 50, perimeter = 20 + 14.1421 ≈ 34.1421.
This isosceles right triangle (45-45-90) tool links the entered values (decimal places, solve from, unit) to the target geometry relationships used in class and practice problems. Instead of solving each intermediate step manually, you can validate setup and arithmetic quickly while still tracing which measurements drive the final result.
Formula focus: the calculator formula
Isosceles Right Triangle (45-45-90) shows up in school geometry, technical drafting, construction layout checks, and early engineering design estimates. When values are changed repeatedly, the calculator helps you compare scenarios quickly and see how sensitive the shape is to each dimension.
Start with the primary outputs (leg (a = b), hypotenuse (c), area, perimeter) and then use the remaining cards/tables to confirm consistency with your diagram. Keep units consistent across inputs, and round only at the end if your assignment or project specifies a fixed precision.
A right triangle with two 45° angles and two equal legs. The hypotenuse equals a leg times √2.
Divide the hypotenuse by √2 (approximately 1.4142). For example, hypotenuse 10 → leg ≈ 7.071.
Because its fixed angle ratios yield simple side ratios (1 : 1 : √2), making it easy to solve without a calculator. Use this as a practical reminder before finalizing the result.
It equals a²/c = a/√2. Geometrically, it is the perpendicular dropped from the right-angle vertex to the hypotenuse.
Inradius r = Area / semi-perimeter = (a²/2) / ((2a + a√2)/2) = a(√2 − 1). Keep this note short and outcome-focused for reuse.
Diagonal braces in construction, cutting square tiles, engineering supports, and many standardized test problems. Apply this check where your workflow is most sensitive.