Divide binary numbers with long division steps. View quotient and remainder in binary, decimal, hex, and octal. Includes step-by-step division table and precision control for fractional results.
The **Binary Division Calculator** performs division of two binary numbers using the long division algorithm, displaying each step in detail — just like pencil-and-paper division, but in base 2. It shows the quotient and remainder in binary, decimal, hexadecimal, and octal formats, with optional fractional precision for non-integer results.
Binary long division follows a simple repeated process: compare the current partial remainder with the divisor; if the partial remainder is greater than or equal to the divisor, subtract it and write 1 in the quotient; otherwise, write 0 and bring down the next bit. This restoring division algorithm is the foundation of hardware divider circuits found in CPUs and DSP chips.
The calculator handles dividends and divisors of any length, detects division by zero, and clearly separates the integer quotient from the remainder. When you enable fractional precision, it continues the division beyond the binary point, producing binary fractions with up to 32 bits of precision — useful for understanding fixed-point arithmetic in embedded systems or digital signal processing.
A detailed step-by-step table shows the partial remainder, comparison result, quotient bit, and subtraction at each iteration. Load preset examples to see dividing powers of 2, odd/even numbers, cases with large remainders, and repeating fractional patterns.
Use this calculator when you need more than a single quotient value. It accepts a binary dividend and divisor, lets you extend the result with 4, 8, 16, or 32 fractional bits, and shows whether the standard verification identity still balances: dividend = quotient × divisor + remainder. That makes it useful for checking homework, validating firmware math, or debugging bit-level division code where the remainder matters as much as the quotient.
It is also practical for understanding how long division evolves one bit at a time. The step table exposes each partial remainder, each compare decision, and each quotient bit that gets written. If you are comparing exact integer division with a fractional binary expansion, this calculator shows both in the same workflow instead of forcing you to switch tools.
Binary long division: repeatedly compare partial remainder R with divisor D. If R ≥ D, set quotient bit to 1 and subtract D from R. Otherwise set quotient bit to 0. Bring down next bit. Verify: Quotient × Divisor + Remainder = Dividend.
Result: 100 remainder 10
11010₂ is 26 and 110₂ is 6, so the quotient is 4 with a remainder of 2. In binary that is 100 remainder 10, and the long-division table shows the subtract-and-bring-down steps.
This calculator is built around the same sequence used in manual binary long division. You enter a dividend and divisor as binary strings, and the tool walks left to right through the dividend bits. For each step it shows the current partial remainder, whether that remainder is large enough to subtract the divisor, the quotient bit written at that position, and the remainder left after subtraction. Because the outputs also include decimal, hexadecimal, and octal forms, you can cross-check the same division in several bases without converting the numbers yourself.
If the divisor does not divide the dividend evenly, the calculator keeps the integer remainder and can optionally continue into fractional bits. Choosing 4, 8, 16, or 32 fractional places effectively brings down extra zeros after the binary point, so you can inspect the binary fraction that follows the integer quotient. This is especially helpful in fixed-point arithmetic, embedded work, and digital logic classes where seeing the remainder evolve is more informative than seeing a rounded decimal answer.
The fractional precision setting is useful when a quotient does not terminate immediately in base 2. For example, some divisions produce a clean integer quotient, while others keep generating a repeating or truncated binary fraction. Instead of hiding that behavior, the calculator shows the expanded quotient directly and marks the extra rows in the step table as fractional steps. That makes it easier to explain why an exact decimal quotient may not map neatly to a short binary representation.
The verification section is equally valuable because it confirms the integer portion of the computation with the identity quotient × divisor + remainder = dividend. When you are reviewing student work, checking a CPU-style restoring division routine, or confirming that a remainder was handled correctly, this extra output is often the fastest way to catch a logic mistake. The included quick-reference table for division by powers of two also helps connect the long-division process to bit-shift intuition.
Binary long division compares the divisor with the current partial remainder from left to right. If the divisor fits, write 1 in the quotient and subtract; if it does not, write 0 and bring down the next bit.
Dividing by 2 in binary is a right shift: move all bits one position to the right. For example, 1010 (10) >> 1 = 0101 (5).
Yes. Just like decimal division, binary division can produce a quotient and a remainder. The remainder is also expressed in binary.
Binary long division follows the same algorithm as decimal long division but uses only two digits. At each step, you test whether the divisor fits into the current remainder and write 1 or 0 in the quotient accordingly.
The remainder is the leftover value after the divisor has been subtracted as many times as it fits. It is always smaller than the divisor.
Binary division is used in hardware integer-divide units, fixed-point arithmetic, block sizing, and remainder calculations. Many processors implement it with repeated subtraction, restoring division, or non-restoring division techniques.