Calculate your weekly irrigation water budget based on landscape area, evapotranspiration rate, crop factor, and system efficiency.
An irrigation water budget tells you exactly how much water your landscape needs each week, taking into account plant type, climate, and system efficiency. The calculation is based on reference evapotranspiration (ET), which measures how much water evaporates from soil and transpires from plants under local weather conditions. Multiplying ET by a crop coefficient and your irrigated area gives the net water need; dividing by irrigation system efficiency gives the gross volume to apply.
Overwatering is one of the biggest sources of residential water waste, accounting for up to 50% of outdoor use in some communities. An accurate water budget eliminates guesswork and ensures your plants get exactly what they need — no more, no less.
This calculator accepts your landscape area, weekly ET rate, crop/landscape coefficient, and irrigation system efficiency. The output is gallons per week, which you can use to program smart controllers, set manual watering schedules, or verify that your current practices align with actual plant needs.
Most homeowners overwater their lawns by 30–50%. A water budget based on ET data ensures you apply the right amount, saving water and money while keeping your landscape healthy. Regular monitoring of this value helps energy teams detect usage anomalies early and address equipment malfunctions or operational issues before they drive utility costs higher.
Gallons/Week = Area (sq ft) × ET (in/week) × Crop Factor × 0.623 / Efficiency
Result: 2,617 gal/week
Net need = 3,000 × 1.5 × 0.7 × 0.623 = 1,962 gal. At 75% sprinkler efficiency, gross application = 1,962 / 0.75 = 2,617 gallons per week.
Evapotranspiration combines evaporation from soil with transpiration through plant leaves. It is driven by solar radiation, air temperature, humidity, and wind speed. In hot, dry, windy climates, ET can exceed 2 inches per week in summer. In cool, humid climates, it may be under 0.5 inches.
A sprinkler system rated at 65% efficiency means that for every 100 gallons applied, only 65 gallons reach the root zone. The rest is lost to evaporation, wind drift, runoff, or uneven coverage. Upgrading to drip irrigation or pressure-regulated heads can boost efficiency to 85%+.
Weather-based smart irrigation controllers automatically adjust watering schedules using real-time or historical ET data. They reduce outdoor water use by 20–40% compared to fixed schedules. EPA's WaterSense program certifies controllers that meet a 15% savings threshold.
Reference ET is the amount of water lost through evaporation and plant transpiration under standardized conditions. It is expressed in inches per day or week and varies with temperature, humidity, wind, and solar radiation.
For cool-season turf (fescue, bluegrass): 0.7–0.8. Warm-season turf (Bermuda, Zoysia): 0.6–0.7. Drought-tolerant native plants: 0.3–0.5. Trees and shrubs: 0.4–0.6.
Subtract effective rainfall from the gross water need. Most irrigation controllers with rain sensors do this automatically. Effective rainfall is typically 75–90% of measured precipitation.
Efficiency accounts for water lost to wind, evaporation, runoff, and uneven distribution. Drip systems are 85–95% efficient. Rotary sprinklers are 65–75%. Spray heads are 50–65%.
Ideally monthly, as ET varies dramatically by season. Summer ET can be 3–4× higher than winter ET. Many irrigators update weekly using weather station data.
Yes. The formula is the same regardless of scale. Commercial properties should use zone-by-zone budgets since different areas may have different plants, exposures, and sprinkler types.