Convert mining hash rates between H/s, KH/s, MH/s, GH/s, TH/s, PH/s, and EH/s. Instantly translate hash rate units for any cryptocurrency.
Mining hardware and network statistics use different hash rate units depending on the scale. A single GPU might hash at megahashes per second (MH/s), while Bitcoin's network hash rate is measured in exahashes per second (EH/s). Converting between these units is essential for accurate profitability calculations and hardware comparisons.
This converter handles all standard hash rate units from H/s (hashes per second) up to EH/s (exahashes per second). Enter a value in any unit and instantly see the equivalent in all other units. Each step up is a factor of 1,000: 1 KH/s = 1,000 H/s, 1 MH/s = 1,000,000 H/s, and so on.
Whether you're comparing ASIC miner specs, reading network statistics, or inputting values into profitability calculators, this tool ensures you're working with the right numbers.
Crypto traders, long-term holders, and DeFi participants benefit from transparent crypto hash rate calculations when planning entries, exits, or portfolio rebalances. Revisit this calculator whenever market conditions shift to keep your strategy grounded in accurate data.
Mismatched hash rate units are one of the most common errors in mining calculations. Entering your hash rate in MH/s when the calculator expects GH/s will give results off by a factor of 1,000. This converter eliminates unit confusion and ensures your mining math is accurate. Real-time recalculation lets you model different market scenarios quickly, so you can act with confidence rather than relying on rough mental estimates.
1 KH/s = 1,000 H/s 1 MH/s = 1,000 KH/s = 1,000,000 H/s 1 GH/s = 1,000 MH/s = 1,000,000,000 H/s 1 TH/s = 1,000 GH/s = 1,000,000,000,000 H/s 1 PH/s = 1,000 TH/s = 1,000,000,000,000,000 H/s 1 EH/s = 1,000 PH/s = 1,000,000,000,000,000,000 H/s
Result: 110,000 GH/s = 0.11 PH/s
An ASIC miner rated at 110 TH/s is equivalent to 110,000 GH/s, 110,000,000 MH/s, or 0.11 PH/s. When Bitcoin's total network is 550 EH/s, this single miner represents 0.00002% of the network.
The standard hash rate units follow SI prefix conventions: H/s, KH/s (kilo), MH/s (mega), GH/s (giga), TH/s (tera), PH/s (peta), and EH/s (exa). Each is 1,000 times the previous. Understanding this hierarchy is fundamental to mining calculations.
Using the wrong unit in a profitability calculator can give results that are off by orders of magnitude. If you enter 100 MH/s when you meant 100 GH/s, your projected revenue will be 1,000 times too low. Always double-check that your hash rate and network hash rate use consistent units.
GPU mines typically operate in the MH/s to GH/s range per card. ASIC miners for SHA-256 (Bitcoin) operate at 50-250+ TH/s per unit. Network-level hash rates for major coins range from GH/s for small coins to EH/s for Bitcoin.
Hash rate measures how many cryptographic hash computations a miner can perform per second. Higher hash rates mean more attempts at finding a valid block, increasing your chances of earning mining rewards.
MH/s (megahashes per second) equals one million hashes per second. TH/s (terahashes per second) equals one trillion hashes per second. TH/s is one million times larger than MH/s, with GH/s (one billion) in between.
Bitcoin's network hash rate is typically expressed in EH/s (exahashes per second). As of 2025-2026, the Bitcoin network operates at roughly 500-700 EH/s. Individual ASIC miners are measured in TH/s.
Yes, for hash rates the convention uses SI prefixes where each step is exactly 1,000. This differs from data storage where the binary prefix uses 1,024. So 1 TH/s is exactly 1,000 GH/s.
Check your miner's specifications or the dashboard of your mining software. ASIC miners typically report in TH/s or GH/s, while GPU mining software usually shows MH/s. The unit should be clearly labeled.
EH/s stands for exahashes per second, equal to 1 quintillion (10^18) hashes per second. It's used for major networks like Bitcoin. Only the largest cryptocurrencies reach EH/s-level network hash rates.