Calculate VPD from temperature and humidity for greenhouse, indoor garden, and cannabis growing. Includes crop-specific optimal ranges and leaf temperature correction.
Vapor Pressure Deficit (VPD) is the single most important environmental parameter for controlling plant transpiration, nutrient uptake, and growth rate in controlled environments. It measures the "drying power" of the air—the difference between the amount of moisture the air can hold at saturation and the amount it currently holds.
Unlike relative humidity alone, VPD accounts for both temperature and humidity in a single value that directly correlates with plant water loss through stomata. Low VPD (below 0.4 kPa) means the air is nearly saturated, slowing transpiration and increasing disease risk. High VPD (above 1.6 kPa) means the air is very dry, causing excessive transpiration, wilting, and stomatal closure that reduces photosynthesis.
This calculator computes VPD from air temperature and relative humidity, with an optional leaf temperature correction for more accurate results. It provides crop-specific optimal VPD ranges for cannabis, tomatoes, lettuce, and other greenhouse crops, along with a color-coded VPD chart showing ideal conditions across different temperature/humidity combinations.
Controlling VPD is the key to maximizing plant growth in greenhouses and grow rooms. This calculator replaces VPD lookup charts with instant calculations and provides tailored recommendations for your specific crop and growth stage. This vapor pressure deficit calculator helps you compare outcomes quickly and reduce avoidable mistakes when making day-to-day care decisions. Use the estimate as a planning baseline and confirm final decisions with a qualified professional when risk is high.
SVP = 0.6108 × e^((17.27 × T) / (T + 237.3)), where T is temperature in °C. VPD (kPa) = SVP × (1 − RH/100). With leaf temp correction: VPD = SVP_leaf − (SVP_air × RH/100). Typical leaf temp is 1-3°C below air temp under lights.
Result: VPD = 1.23 kPa (ideal for vegetative growth)
SVP at 24.4°C (leaf) = 3.06 kPa. VP at 25.6°C air and 55% RH = 3.31 × 0.55 = 1.82 kPa. VPD = 3.06 − 1.82 = 1.24 kPa. This falls within the ideal 0.8-1.3 kPa range for vegetative growth.
Plants have different transpiration needs at each growth stage. Seedlings and clones have limited root systems and can't replace water lost through leaves, so they need low VPD (0.4-0.8 kPa) maintained by high humidity (65-80%) and moderate temperatures (72-78°F). During vegetative growth, established root systems can support higher transpiration rates. VPD of 0.8-1.2 kPa optimizes growth. In flowering/fruiting, slightly higher VPD (1.0-1.5 kPa) drives nutrient transport to developing fruits while reducing disease risk from excessive moisture.
The VPD that matters for plant physiology is at the leaf surface, not in the bulk air. Leaves are typically 1-3°C cooler than air under artificial lighting due to transpirational cooling, but can be warmer in direct sunlight or still air. The boundary layer—a thin layer of still, humid air around the leaf surface—reduces effective VPD. Good air circulation thins this boundary layer, increasing transpiration. This is why fans are essential in controlled environments even when temperature and humidity are dialed in.
The most effective way to manage VPD is with an integrated HVAC controller that adjusts both temperature and humidity to maintain target VPD. Humidifiers raise humidity (lower VPD), while dehumidifiers and exhaust fans lower it (raise VPD). Heating raises VPD; cooling lowers it. The cheapest approach is often to control humidity alone with temperature-triggered exhaust, but this is less precise. Advanced systems use predictive algorithms to anticipate VPD changes from lighting transitions (lights on/off) and proactively adjust climate.
Seedling/clone: 0.4-0.8 kPa (high humidity). Vegetative: 0.8-1.2 kPa. Late flower: 1.0-1.5 kPa (lower humidity to prevent mold). These ranges maximize transpiration without water stress.
Because the same RH% means very different things at different temperatures. 60% RH at 70°F is very different from 60% RH at 85°F. VPD captures both variables in one number that directly relates to plant water loss.
Under grow lights, leaf temperature is typically 1-3°F below air temperature due to transpirational cooling. Without strong airflow, leaves can be warmer than air. Leaf VPD is more accurate than air VPD for predicting plant stress.
Above 1.5-1.6 kPa, stomata close to conserve water. This reduces CO₂ intake and photosynthesis, causing wilting, leaf curl, tip burn, and stunted growth. Very high VPD also increases salt stress from rapid nutrient uptake.
Below 0.4 kPa, transpiration nearly stops. This reduces nutrient transport (especially calcium), encourages fungal diseases (powdery mildew, botrytis), and can cause edema (blistering) on leaves.
Increase humidity (humidifier, wet walls), decrease temperature, or both. Conversely, to raise VPD: decrease humidity (dehumidifier, exhaust) or increase temperature. An HVAC controller with VPD input automates this.